150pc SUZUKI UTIL ATV Bolt Kit LTA King Quad Runner Eiger LTF Ozark LT-& 4x4 2x4

Description

THIS IS IT!!!
-THE NEW-
"SUZUKI UTILITY ATV 150 PC BOLT KIT"
This 150 piece HIGH QUALITY OEM style bolt kit is recommended for all ...
LT-A
KINGQUAD 280 300 400 450 695 700 & 750 cc, EIGER 376 & 400 cc,
LT-V700, TWIN PEAKS &
LT-F500 FX FW 493cc, LT-V
OZARK 246 & 250 cc,
QUAD RUNNER 158
160 229 230 246 250 493 & 500 cc,
QUAD MASTER 493 & 500 cc, 4X4 AND 4X2 WHEEL DRIVE  ATVS
Designed to help you maintain and restore your Suzuki utility ATV with OEM type fasteners.
This Specbolt 150pc kit was designed to work for all Suzuki Utility and 4x4 models.
Designed to help you ma
intain restore and upgrade your Suzuki Utility ATV using correct original type fasteners.
This all new Specbolt 150pc kit is based off our original 120pc Suzuki Utility ATV kit, but with some very worthwhile upgrades.
Check it out!!!
Upgrades from our 120pc kits include:
Full 16pc Lug Nut kit (.00 value)
These can be used with OEM or aftermarket wheels.
Full set of 12 OEM style nylon push pull rivets.
2 different length M8 flange bolts to fit grab bars, bumpers skid plates etc...
6 Black M6x20 truss head screws for plastics, mudflaps, heel guards etc...
...PLUS
all the other essential stuff like bolts for plastic body panels, fenders, seat, body bolts and fender washers, engine side cover bolts, radiator bolts, shifter bolt, cylinder and head nuts (most), exhaust bolts, various handlebar clamp bolts, carb bowl screws, bolts for controls, most fuel tank bolts
FREQUENTLY ASKED QUESTIONS
-What was the 150pc kit designed for?-
To bridge the gap between our popular 120pc kit and our bigger 250pc kit.
The 150pc kits have the stuff you really want.
-What is an OEM matching bolt?-
OEM matching bolts have the same design and look of your original bolts.
Our OEM style bolts are designed to match exact factory sizes with the same head style and strength ratings (8.8 or 10.9 grade) that originally came on your motorcycle. They all meet or exceed the factory specs.
These are all heat treated and zinc plated to look great, resist corrosion, and last the life of your motorcycle or ATV.
-Can I find these at a local hardware store?-
As most of us know from experience, OEM style fasteners are not available at our local hardware stores. The metric fasteners found at Ace or Home Depot are not going to match.
These fasteners are usually only found at the cycle dealerships and expensive to purchase on an individual basis.
It's great to have the right fasteners on hand when you need them.
-What about OEM style nuts?-
Specbolt uses OEM matching nuts. You get a generous assortment of both locking and non locking nuts in M5, M6, M8, and M10 sizes.
-What about metric washers?-
Washers are important for many things including plastics and bodywork, engine, and exhaust mounts. We include a nice variety of the most commonly found washers used on your bike.
-Will I get any sealing washers?-
Specbolt 150pc kits contain copper and aluminum soft tempered compression washers. 2 each of 3 different, most needed sizes. The size are M6x11 copper typically used for your coolant drain bolts or oil height check bolt, M8x15 aluminum used for oil drain plugs, and M10x14.5 aluminum for hydraulic brake lines, etc..
-What if I have aftermarket parts on my bike?-
Specbolt kits include some additional sizes to fit some of the aftermarket items on your bike as well...such as nerf bars, exhaust, etc ... If you want to be sure to get the right size fasteners for your specific aftermarket part...just ask. We strive to get you everything you need.
-Will I get every nut and bolt found on my bike? What isn't included?-
This kit is designed as a maintenance kit and is a great assortment most of the commonly used fasteners found on your bike. It is not a full on restoration kit. It doesn't include shock or suspension/linkage bolts, axles/axle nuts, swing-arm bolt, or any long case bolts over 40mm.
-What if I want to customize my kit or request more of a certain type of fastener?-
Not a problem...If you have any special needs or want to request certain sizes just send me an email or call me.  I will do my best to create a custom kit with your specific needs in mind.
-What if I run low on a certain fastener. Can I get refill packs?-
Yes... I offer every one of our fastener sizes in convenient and economical refill packs. Just send me an email, check the website, or call me.
-FREE PRIORITY SHIPPING TO ANYWHERE IN THE USA-
GET IT EVEN FASTER (1 or 2 days)WITH ECONOMICAL USPS EXPRESS MAIL.
-FAST International Priority and Express shipping options-
We will absolutely mail your kit the same or next business day so you will get it fast!